Filter
Top Products
18 Battery
3
Using the pull-tab, lift the battery off the computer base.
Replacing the Battery
Procedure
1
Place the battery in the battery bay and tighten the captive screws that
secure the battery to the computer base.
2
Connect the battery cable to the connector on the system board.
Postrequisites
1
Replace the base cover. See "Replacing the Base Cover" on page 16.
2
Follow the instructions in "After Working Inside Your Computer" on page 13.
1 battery 2 pull-tab
3 captive screws (2) 4 battery cable
1
2
3
4