Filter
Top Products
Hard Drive 27
4
Remove the four screws that secure the hard-drive bracket to
the hard drive.
5
Lift the hard-drive bracket off the hard drive.
CAUTION: When the hard drive is not in the computer, store it in protective
antistatic packaging. See "Protecting Against Electrostatic Discharge" in the
safety instructions that shipped with your computer.
Replacing the Hard Drive
Procedure
1
Place the hard drive in the hard-drive bracket.
2
Replace the four screws that secure the hard-drive bracket to the hard
drive.
3
Connect the interposer to the hard drive.
4
Place the hard-drive assembly in the computer base.
5
Tighten the three captive screws that secure the hard-drive assembly to the
computer base.
1 pull-tab 2 screws (4)
3 hard-drive bracket
1
3
2