Filter
Top Products
Status-Lights Board 55
4
Remove the screw that secures the status-light board to the palm-
rest assembly.
5
Carefully lift the status-light board and release its cable from the slot on
the palm-rest assembly.
Replacing the Status-Lights Board
Procedure.
1
Slide the status-light board cable through the slot in the
palm-rest assembly.
2
Align the slot on the status-light board with the alignment post on the
palm-rest assembly.
3
Replace the screw that secures the status-light board to the
palm-rest assembly.
4
Turn the palm-rest assembly over.
5
Route the status-light board cable through the routing guides on the
palm-rest assembly.
1 status-light board 2 screw
11
2