Replacing the Speakers | 59
Replacing the Speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the speakers with the screw holes on the computer base
and replace the screws that secure the speakers to the computer base.
2 Route the speakers cable through the routing guides on the computer base and then
connect the speakers cable to the connector on the system board.
Postrequisites
1 Follow the instructions from step 2 to step 5 in Replacing the Palm Rest.
2 Replace the dispaly assembly. See “Replacing the Display Assembly” on page 48.
3 Replace the macro keyboard. See “Replacing the Macro Keyboard” on page 38.
4 Replace the keyboard. See “Replacing the Keyboard” on page 35.
5 Replace the center control cover. See "Replacing the Center Control Cover" on
page 29.
6 Replace the base cover. See "Replacing the Base Cover" on page 15.
7 Replace the battery pack. See "Replacing the Battery Pack" on page 13.
8 Follow the instructions in "After Working Inside Your Computer" on page 11.
30
Book.book Page 59 Thursday, June 7, 2012 3:01 PM