Filter
Top Products
2. Use the adhesive on the coin-cell battery and adhere it to the system board.
3. Connect the coin-cell battery cable to the connector on the system board.
4. Replace the palm rest assembly (see Replacing the Palm Rest Assembly).
5. Replace the keyboard (see Replacing the Keyboard).
6. Replace the hinge cover (see Replacing the Hinge Cover).
7. Replace the memory module(s) (see Replacing the Memory Module(s)).
8. Follow the instructions from step 6 to step 8 in Replacing the Hard Drive.
9. Replace the battery pack (see Replacing the Battery Pack).
10. Replace the base cover (see Replacing the Base Cover).
Back to Contents Page
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.