Filter
Top Products
Page 18 | AlliedWare™ OS How To Note: EPSR
Example 3: EPSR and RSTP
This transit node (B) is the same as in the previous example.
create vlan=vlan1000 vid=1000
add vlan=1000 port=1-2 frame=tagged
create vlan=vlan2 vid=2
add vlan=2 port=1-2 frame=tagged
delete vlan=1 port=1-2
create epsr=domain1 mode=transit controlvlan=vlan1000
add epsr=domain1 datavlan=vlan2
enable epsr=domain1
Switches C and D have the same configuration in this example.
Configure the STP VLAN:
create vlan=vlan10 vid=10
add vlan=10 port=10-11 frame=tagged
Remove the STP VLAN’s ports from the default VLAN:
delete vlan=1 port=10-11
Configure STP:
create stp=example
add stp=example vlan=vlan10
enable stp=example
set stp=example mode=rapid
2. Configure the transit node (switch B) that belongs just to the EPSR domain
3. Configure the switches that belong to the RSTP instance (switches C and D)