Filter
Top Products
Page 23 | AlliedWare™ OS How To Note: EPSR
Example 5: EPSR with management stacking
Example 5: EPSR with management stacking
In this example:
• three switches are stacked together, so you can manage all three switches by entering
commands into the CLI of any one of them
• the three switches are also configured as an EPSR domain
• vlan
1
000 is used as the stacking VLAN and as the EPSR control VLAN. Stacked switches
use the stacking VLAN to communicate with each other
• the data VLAN for EPSR is vlan20
• ports on the stacked switches are numbered using the stacking scheme of hostid.0.port
Master
Node
(host1)
Transit
Node
(host3)
Transit
Node
(host2)
epsr-example-stack
SP
port 1.0.1:
primary
port 1.0.2:
secondary
vlan45
vlan30
port 2.0.1
port 2.0.2 port 3.0.2
port 3.0.1