Filter
Top Products
Page 107 | AlliedWare™ OS How To Note: IGMP
IGMP debugging > Example
When IGMP debugging is enabled, the command show ip igmp gives more information
about static IGMP associations, as shown in bold in the following output. See "Explanation of
Static IGMP" on page 51 for more information about static associations.
X Output for show ip igmp changes
IGMP Protocol
------------------------------------------------------------------------
Status ........................... Enabled
Default Query Interval ........... 125 secs
Default Timeout Interval ......... 260 secs
Last Member Query Interval ....... 10 (1/10secs)
Last Member Query Count .......... 2
Robustness Variable .............. 2
Query Response Interval .......... 100 (1/10secs)
Disabled All-groups ports ........ None
Interface Name .......... vlan100 (DR)
Group List ..............
Group. 224.12.13.14 Static association Refresh time Infinity
Ports 5
Static Ports 5
User-created static IGMP associations:
--------------------------------------
Group. 224.12.13.14 Static association Refresh time Infinity
Static Ports 5
------------------------------------------------------------------------