Filter
Top Products
Page 97 | AlliedWare™ OS How To Note: IGMP
Stopping snoopers from snooping non-IGMP messages > Controlling which addresses create All Groups entries
Looking at the above outputs, note that debugging did not print out any messages about the
OSPF router after we removed the address, but it did tell us when the port had been
removed from the All Groups list. Also, remember that port 24 only times out of the All
Groups list when its internal IGMP message timer counts down to zero.
Manager Switch 2> show igmpsnooping
IGMP Snooping
------------------------------------------------------------------------
Status ........................... Enabled
Disabled All-groups ports ........ None
Vlan Name (vlan id) ..... default (1)
Fast Leave .............. Off
Group List ..............
No group memberships.
Vlan Name (vlan id) ..... vlan100 (100)
Fast Leave .............. Off
Group List ..............
All Groups Entry timeout 214 secs
Ports 24-25
------------------------------------------------------------------------
Manager Switch 2> Timing out port 24 from group 224.0.0.2 on vlan100
Deleting port 24 from group 224.0.0.2 on vlan100
Reconstructing snooping entries: 24,
Manager Switch 2> show igmpsnooping
IGMP Snooping
------------------------------------------------------------------------
Status ........................... Enabled
Disabled All-groups ports ........ None
Vlan Name (vlan id) ..... default (1)
Fast Leave .............. Off
Group List ..............
No group memberships.
Vlan Name (vlan id) ..... vlan100 (100)
Fast Leave .............. Off
Group List ..............
Group. 224.12.13.14 Entry timeout 224 secs
Ports None
All Groups Entry timeout 242 secs
Ports 25
------------------------------------------------------------------------