Filter
Top Products
Page 57 | AlliedWare™ OS How To Note: IGMP
Static IGMP > Explanation of Static IGMP
When a static entry’s port goes down
Finally, note that when the port attached to a static entry goes down, the static entry remains
but no ports are attached to it. You can see this from the output of the commands show
igmpsnooping and show ip igmp for switch
1
when port 5 has been disconnected.
Manager Switch 1> show igmpsnooping
IGMP Snooping
------------------------------------------------------------------------
Status ........................... Enabled
Disabled All-groups ports ........ None
Vlan Name (vlan id) ..... default (1)
Fast Leave .............. Off
Group List ..............
No group memberships.
Vlan Name (vlan id) ..... vlan100 (100)
Fast Leave .............. Off
Group List ..............
Group. 224.12.13.14 Entry timeout Infinity
Ports None
All Groups Entry timeout 152 secs
Ports 49
------------------------------------------------------------------------
Manager Switch 1> show ip igmp
IGMP Protocol
------------------------------------------------------------------------
Status ........................... Enabled
Default Query Interval ........... 125 secs
Default Timeout Interval ......... 260 secs
Last Member Query Interval ....... 10 (1/10secs)
Last Member Query Count .......... 2
Robustness Variable .............. 2
Query Response Interval .......... 100 (1/10secs)
Disabled All-groups ports ........ None
Interface Name .......... vlan100
Other Querier timeout ... 140 secs
Group List ..............
Group. 224.12.13.14 Static association Refresh time Infinity
Ports None
Static Ports None
------------------------------------------------------------------------