Filter
Top Products
Page 79 | AlliedWare™ OS How To Note: IGMP
Configurable IGMP timers and counters > Default Timeout Interval
Defaults First, the following output shows the default settings.
The Default Timeout Interval = (2*
1
25) + (
1
00/
1
0) = 260 seconds.
Increase
Default
Query
Interval
Next, change the Default Query Interval to
1
30 seconds.
The Default Timeout Interval = (2*
1
30) + (
1
00/
1
0) = 270 seconds.
Manager Switch 1> show ip igmp
IGMP Protocol
------------------------------------------------------------------------
Status ........................... Enabled
Default Query Interval ........... 125 secs
Default Timeout Interval ......... 260 secs
Last Member Query Interval ....... 10 (1/10secs)
Last Member Query Count .......... 2
Robustness Variable .............. 2
Query Response Interval .......... 100 (1/10secs)
.
.
.
Manager Switch 1> set ip igmp queryinterval=130
Info (1005003): Operation successful.
Manager Switch 1> show ip igmp
IGMP Protocol
------------------------------------------------------------------------
Status ........................... Enabled
Default Query Interval ........... 130 secs
Default Timeout Interval ......... 270 secs
Last Member Query Interval ....... 10 (1/10secs)
Last Member Query Count .......... 2
Robustness Variable .............. 2
Query Response Interval .......... 100 (1/10secs)
.
.
.