Filter
Top Products
Page 81 | AlliedWare™ OS How To Note: IGMP
Configurable IGMP timers and counters > Default Timeout Interval
Override
Default
Timeout
Interval
To support existing configurations and for maximum flexibility, you can manually override the
Default Timeout Interval. We do not recommend this.
The warning message also displays when the router or switch starts up and in the log file, as
the following output shows.
Manager Switch 1> set ip igmp timeout=180
Warning (2005430): The Default Timeout Interval is below the default safe value of
(Default Query Interval * Robustness ) + (Query Response Interval / 10).
Manager Switch 1> show ip igmp
IGMP Protocol
------------------------------------------------------------------------
Status ........................... Enabled
Default Query Interval ........... 125 secs
Default Timeout Interval ......... 180 secs
Last Member Query Interval ....... 10 (1/10secs)
Last Member Query Count .......... 2
Robustness Variable .............. 2
Query Response Interval .......... 100 (1/10secs)
.
.
.
Manager Switch 1> show log tail
Date/Time S Mod Type SType Message
-------------------------------------------------------------------------------
02 01:22:17 4 ENCO ENCO STAC STAC SW Initialised
02 01:22:17 7 SYS REST NORM Router startup, ver 2.9.2-00, 30-Mar-2003, Clock
Log: 01:22:03 on 02-Dec-2006
02 01:22:19 6 SWIT PINT UP Port1: interface is UP
02 01:22:19 6 SWIT PINT UP Port16: interface is UP
02 01:22:19 3 USER USER LON manager login on port0
02 01:36:59 3 CH MSG WARN The Default Timeout Interval is below the
default safe value of (Default Query Interval *
Robustness ) + (Query Response Interval / 10)
-------------------------------------------------------------------------------