Allied Telesis AT-S63 Switch User Manual


 
363
Chapter 32
Internet Protocol Version 4 Packet
Routing
This chapter describes Internet Protocol version 4 (IPv4) packet routing on
the AT-9400 Basic Layer 3 Switches. The chapter covers routing
interfaces, static routes, and the Routing Information Protocol (RIP)
versions 1 and 2. The sections in the chapter include:
“Supported Platforms” on page 364
“Overview” on page 366
“Routing Interfaces” on page 368
“Interface Names” on page 371
“Static Routes” on page 372
“Routing Information Protocol (RIP)” on page 374
“Default Routes” on page 376
“Equal-cost Multi-path (ECMP) Routing” on page 377
“Routing Table” on page 379
“Route Selection Process” on page 380
“Address Resolution Protocol (ARP) Table” on page 381
“Internet Control Message Protocol (ICMP)” on page 382
“Routing Interfaces and Management Features” on page 384
“Local Interface” on page 387
“AT-9408LC/SP AT-9424T/GB, and AT-9424T/SP Switches” on
page 388
“Routing Command Example” on page 390
“Non-routing Command Example” on page 394
“Upgrading from AT-S63 Version 1.3.0 or Earlier” on page 396