Filter
Top Products
SwitchBlade x3112 Installation Guide
27
USB Port The USB slot is an interface designed for temporary storage of
configuration files on a memory stick. This interface is presently
unsupported by the Switchblade x3112 Management Software and will be
available in future software releases.
SD Card Slot The SD slot for a secure digital memory (SD) card is displayed in Figure 9
and is used in the following situations:
Storing backup copies of the master configuration file on the
AT-SBx31CFC Fabric Control Card. You can maintain a library of past
configuration files of a chassis so that you can return a unit to a
previous configuration.
Transferring master configuration files between chassis - You can
configure units that are to have similar configurations by transferring
the master configuration file with a secure digital memory card.
Figure 9 SD Card Slot and LED
An SD card is optional. The AT-SBx31CFC Fabric Control Card can
operate without a memory card.
The following SD flash memory cards are officially supported in the first
release.
SanDisk 2GB Flash card
SanDisk 4GB SDHC Flash card
Note
Others brands can be used but are not guaranteed to work.
For ordering information, contact your Allied Telesis sales representative
or visit our web site.
1818
SD
READY BUSY FAULT