Filter
Top Products
Chapter 2: Installation
64
8. If you have a second (redundant) AT-SBx3161 System Power Supply
to install and the first power supply is installed in slot D, remove the
blank power supply panel by lifting the blank panel handle and lifting
the panel out of the slot C. If the first power supply is already installed
in slot C, skip this step.
9. Install the second AT-SBx3161 System Power Supply into slot C or D,
whichever is open, by repeating steps 3 through 7.
The next step is to install the AT-SBx3165 PoE Power Supply(s).