Filter
Top Products
Various Printing Operations
31
VPhoto Color Printing on Photo Realistic Labels
This section describes how to print VPhoto Color images on Photo Realistic Labels.
Photo Realistic Labels may be used as photo stickers. Prepare the image you want to
print using a scanner or a digital camera, then layout it out within the printable area of a
Photo Realistic Label.
Requirement
You need the following items for printing on Photo Realistic Labels.
• Media
Photo Realistic Labels (7/8" x 5/8") (Part No. 105108-00)
• Ink Cartridges
The following ink cartridges may be used.
Cyan ink cartridge (Part No. 106020-00)
Magenta ink cartridge (Part No. 106015-00)
Yellow ink cartridge (Part No. 106010-00)
Black ink cartridge (Part No. 106005-00)
Finish II ink cartridge (Part No. 105144-00)
Step 1
❿❿
❿❿
❿ Prepare the Image to Be Printed
Create the image you want to print by arranging photographs,
pictures, etc. with any application.
Step 2
❿❿
❿❿
❿ Install the Ink Cartridges
Install the cyan, magenta, yellow, black, and finish II ink cartridges
into the ink cartridge holders. The ink cartridges may be installed
in any order.
For details, please refer to the section entitled “Installing Ink Car-
tridges” in Chapter 1.
Step 3
❿❿
❿❿
❿ Load the Paper in Your Printer
Manual feed mode is used for this printing.
1. Set the paper feed switch to position “M”.
2. Adjust the paper feed guide to the width of the paper plus
several millimeters.