Filter
Top Products
Various Printing Operations
44
The colors (and color compositions) associated with spot colors are shown in the
following table.
■ Colors (and color compositions) used to indicate spot colors
In multi spot color printing, indicate spot colors by selecting colors in the
application that resemble the spot colors.
As much as possible, try to select colors that resemble the spot colors to
be printed. In applications that do not have many color choices, such as
word processors, closely related colors can be used. In this case, how-
ever, check the color output by executing a test print to make sure the
correct spot colors are printed.
roloctopS roloctopsehtetacidniotdesurolocnoitacilppA
dloGcillateM wolleY )egnaro-wolleyro(
revliScillateM yarG
atnegaMcillateM )atnegamotesolcdera(deR,atnegaM
nayCcillateM )naycotesolceulba(eulB,nayC
etihW )etihwotesolcyarga(yargthgiL
kcalB)lamroN( )001=K,0=Y=M=Cro0=B=G=R(kcalblamroN
The following table indicates the color compositions settings that will most
closely resemble the printed results. In applications that allow the user to
make color composition settings, adjust the settings as shown below.
■ Tables of color composition settings for spot color printing
• Color compositions using RGB settings (n/255)
roloctopS R G B
dloGcillateM 522 061 0
revliScillateM 981 391 791
atnegaMcillateM 361 63 511
nayCcillateM 0 671 102
etihW 032 032 032
• Color compositions using RGB settings (n/100%)
roloctopS R G B
dloGcillateM 88 36 0
revliScillateM 47 67 77
atnegaMcillateM 46 41 54
nayCcillateM 0 96 97
etihW 89 89 89
• Color compositions using CYMK settings (n/100%)
roloctopS
C M Y K
dloGcillateM 21 73 001 0
revliScillateM 62 42 32 0
atnegaMcillateM 63 68 55 0
nayCcillateM 001 13 12 0
etihW 2 2 2 0
Note
For instructions on changing color composition settings in
an application, refer to the manual that came with your appli-
cation. Depending on the application, a spot color may not
print correctly even though the color settings were properly
set in the application.