Filter
Top Products
Database Upgrade
2 Advanced Call Router Manual
If Basic Call Router and AltiServ are installed on different machines, you
will not be able to upgrade the Basic Call Router’s database to the
Advanced Call Router’s database.
If you want to re-use routing rule information from Basic Call Router, you
should perform a fresh install of Advanced Call Router to the machine
running AltiServ. From there, you can use the CRDBUpdate tool to update
the Basic Call Router’s database to the Advanced Call Router’s database.
After upgrading, the old rules from the Basic Call Router’s database can
then be used by Advanced Call Router.
Call Router DBUpdate Tool
This tool will copy the source database to overwrite the destination
database. If you want to keep the destination database infomation, please
back up the destination database before upgrade.
To upgrade Basic Call Router’s database to Advanced Call Router’s 5.1
database,
1. Stop Advanced Call Router service and/or Basic Call Router.
2. Run CRDBUpdate.exe.
3. Beside the Source database field, browse and select the 5.0A Basic
Call Router’s database (default name - callrouter.mdb)
4. Beside the Destination database field, browse and select the 5.1
Advanced Call Router’s database (default name - callrouter.mdb)
Figure 1. Call Router DBUpdate tool
5. After selecting the two databases, click the Upgrade button to upgrade
the 5.0A Basic Call Router’s database to the 5.1 Advanced Call
Router’s database.