Filter
Top Products
MULTI-TASKER
3
3
ABOUT YOUR MT106-100 2
MT106-100
Scan Reducer Card
The MT106-100 is a Scan Reducer Card designed
for use in a Multi-Tasker enclosure. When
installed in a Multi-Tasker, this card allows the
connection of a computer video source to a display
or VCR capable of accepting composite or S-Video
signals.
The MT106-100 automatically supports VGA
(640 x 480) and SVGA (800 x 600) input signals
with refresh rates up to 100 Hz, and XGA
(1024 x 768) input signals with refresh rates up to
75 Hz. The MT106-100 converts these non-
interlaced computer video signals to interlaced
NTSC/PAL video signals, offering simultaneous
Composite Video and S-Video outputs. The
MT106-100 also provides a built-in 1-in 3-out
Composite Video distribution amplifier. All three
Composite Video outputs and the S-Video output
are simultaneously available.
The MT106-100 has a number of features that can
be controlled via RS-232 control through the
Multi-Tasker Basic Enclosure. These features
include horizontal and vertical positioning,
quadrant zoom as well as, brightness and
sharpness controls.
The MT106-100 offers a 15-pin HD female
(VGA-type) computer video input connector.
Though this can easily be adapted to 5 BNC
connectors for RGBHV using an ALTINEX VGA to
RGBHV adapter cable. The composite video
outputs are provided through female BNC
connectors and the S-Video output is provided on
a standard 4-pin mini-DIN connector. The 4-pin
mini-DIN connector can be adapted to 2 BNC
connectors using ALTINEX adapter cables.
TECHNICAL SPECIFICATIONS 3
FEATURES/DESCRIPTION MT106-100
GENERAL
Inputs
Input Connector (1) 15-pin HD Female
Outputs
Composite Video
(3) BNC Female
Connectors
S-Video
(1) 4-pin Mini-DIN
Connector
Compatibility
Input
VGA, SVGA
(to 100Hz)
XGA (up to 75 Hz)
Output
Composite, S-Video
(NTSC or PAL)
Table 1. MT106-100 General
MECHANICAL MT106-100
Enclosure Slots Required One
Weight 1.0 lb (0.45 kg)
Connector Panel Black
T° Operating 10°C-35°C
T° Storage 50°C
Humidity 90% non-condensing
MTBF (calc.) 40,000 hrs
Table 2. MT106-100 Mechanical
ELECTRICAL MT106-100
Input Video Signals
Analog 1.7V max.
Impedance
75 Ohms +/-1%
(terminated)
Input Sync Signal
Horizontal, Vertical TTL (+/-)
Impedance 10k Ohms
Video/S-Video Output
Signal
Analog Gain of 1.05% (+/-)
Fall/ Rise Time 1.4ns
Impedance 75 Ohms
Power
Power from
MT100-100
+6V -6V
Power
Consumption
MT106-100 370 mA 30 mA 2.4 watts
Table 3. MT106-100 Electrical