Filter
Top Products
MULTITASKER
400-0394-007
12
14. [MODER]
This command sets the resolution of the video
output.
Command Format: [MODERxCn]
x = Resolution (x = # from 0 to 7)
0 = 640x480 (VGA)
1 = 480p
2 = 800x600 (SVGA)
3 = 1024x768 (XGA)
4 = 1280x1024 (SXGA)
5 = 567p
6 = 720p
7 = 1080i
8 = 1280x768 (WXGA)
9 = 852x480 (WVGA)
Cn = Card ID (n = # from 1 to max slots)
Example:
Send the command [MODER4C4] to set the
resolution of the card in slot 4 to 1280x1024.
15. [BRIGHTm]
This command sets the brightness level to an
absolute value.
Command Format: [BRIGHTmCn]
m = Level (m = # from 0 to 48, default=24)
Cn = Card ID (n = # from 1 to max slots)
Example:
Send the command [BRIGHT12C3] to set the
output brightness to 12 on the card in slot 4.
16. [BRIGHT]
This command displays the brightness setting
and makes the brightness function active for use
with the [+] and [-] commands.
Command Format: [BRIGHTCn]
Cn = Card ID (n = # from 1 to max slots)
Example:
Send the command [BRIGHTC4] to select the
brightness function on C4. Then use the [+] and
[-] commands to increase or decrease the
brightness level as desired.
17. [CONTRm]
This command sets the contrast level to an
absolute value.
Command Format: [CONTRmCn]
m = Level (m = # from 0 to 48,default=40)
Cn = Card ID (n = # from 1 to max slots)
Example:
Send the command [CONTR30C4] to set the
output contrast to 30 on the card in slot 4.
18. [CONTR]
This command displays the contrast setting and
makes the contrast function active for use with
the [+] and [-] control commands.
Command Format: [CONTRCn]
Cn = Card ID (n = # from 1 to max slots)
Example:
Send the command [CONTRC4] to select the
contrast function on C4. Then use the [+] and [-]
commands to increase or decrease the contrast
level as desired.
19. [COLORm]
This command sets the color level to an
absolute value.
Command Format: [COLORmCn]
m = Level (m = # from 0 to 48,default=24)
Cn = Card ID (n = # from 1 to max slots)
Example:
Send the command [COLOR12C4] to set the
output color level to 12 on the card in slot 4.