Filter
Top Products
MULTITASKER
400-0197-006
12
CARD CONTROL
Card control commands allow the main functions of
the card to be executed over the RS-232 bus, or
from the front panel’s programmable keys.
14. [MATmXy]
The matrix command allows the matrix switcher
to be setup for different matrix sizes. The
following tables show how the inputs and
outputs will be configured when the matrix is
changed. The input and output layouts are as
viewed from the front of the card.
Example:
In the 4x4 configuration, when Input 1 is
connected to Output 4, the entire channel, 1a
and 1b, will be switched to Outputs 4a and 4b
respectively.
Command Format: [MATmXyCn]
m = number of inputs (m = 8, 4 or 2)
y = number of outputs (y = 8, 4 or 2)
Cn = Card ID (n = slot # from 1 to max slots)
8 x 8
INPUTS OUTPUTS
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
4 x 4
INPUTS OUTPUTS
1 a 1 a
1 b 1 b
2 a 2 a
2 b 2 b
3 a 3 a
3 b 3 b
4 a 4 a
4 b 4 b
2 x 2
INPUTS OUTPUTS
1 a 1 a
1 b 1 b
1 c 1 c
1 d 1 d
2 a 2 a
2 b 2 b
2 c 2 c
2 d 2 d
15. [ON]
This command will enable an output of a single
card, or a group of cards.
SINGLE CARD OPERATION
Command Format: [ONmCn]
m = Output No. (m = # from 1 to 8)
Cn = Card ID (n = # from 1 to max slots)
Example:
There is an MT110-103 card in slot 4. All of the
outputs on the card are off.
1) [ON1C4]: Turn on only Output 1 of the
MT110-103 card.
2) [ONC4]: Turn on all outputs of the
MT110-103 card.