Filter
Top Products
■ WPA with RADIUS Network
- Tap on the Network Key tab. Enter the following:
- Authentication: select WPA. And check “The key is provided for
me automatically”.
- Data encryption: select TKIP.
- Tap on 802.1x tab, Enter the following:
- Check “Use IEEE 802.1x network access control”.
- EAP Type: Select the type of EAP authentication used by your
network, either PEAP or Smart Card or Certificate (EAP-TLS).
- When done, tap ok.
5. The Configure Wireless Networks screen should appear, with your new
network listed as Unavailable. Check Automatically connect to non-
preferred networks. Tap ok.