GA-M69VM-S2 Motherboard - 70 -
English
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
` Standard CMOS Features
` Advanced BIOS Features
` Integrated Peripherals
` Power Management Setup
` PnP/PCI Configurations
` PC Health Status
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
ESC: Quit KLJI: Select Item
F8: Q-Flash F10: Save & Exit Setup
Time, Date, Hard Disk Type...
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Advanced Chipset Features
` DRAM Configuration [Press Enter]
` LDT & PCI Bus Control [Press Enter]
` PCIE Configuration [Press Enter]
` IGX Configuration [Press Enter]
SB600 Spread Spectrum [Disabled]
CPU Clock Ratio [Auto]
CPU Frequency (MHz) [Auto]
Item Help
Menu Level`
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Step 2: Press <Enter> on the Advanced Chipset Features item to enter the submenu. Then
In IGX Configuration press <Enter>.
Step 3: Set Video Display Devices under the IGX Configuration submenu to TV Only.
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
IGX Configuration
IGX Clock Mode [Sync]
x Async IGX Clock 133MHz
x Async IGX Clock Source CPU CLK
IGX Clock Gating [Enabled]
IGX Multi Function [Disabled]
Video Display Devices [TV Only]
TV Standard [NTSC]
Item Help
Menu Level`
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Step 4:Save and exit BIOS Setup.
Step 1: In BIOS Setup, press <Ctrl>+<F1> to access advanced options.
Method 1: Throuth the BIOS Setup program
Enabling the TV Out Function