Filter
Top Products
6
Chapter 2
Hardware Installation
2-1 Hardware installation Steps
When installing the system, make sure to follow steps described in below:
1.
Check motherboard setting
2.
Install CPU
3.
Install memory
4.
Install expansion cards
5.
Connect ribbon cables, panel wires, and power supply
6.
Setup BIOS
7.
Install software driver & utility
2-2 Checking Motherboard’s Jumper Setting
(1) Keyboard Power On function Enabled/Disabled: JP1
USB Wake-Up function Enabled/Disabled : JP4
When set as Enabled you can use keyboard to power on the system by password key-
in, and use USB device to wake up the system.
JP4 1-2 closed USB Power On Disabled (Default)
JP1 1-2 closed K/B Power On Disabled (Default)
JP4
13
JP4
13
JP4 2-3 closed USB Power On Enabled
JP1 2-3 closed K/B Power On Enabled
JP1
3
1
JP1
3
1
(2)
CPU Front Side Bus Frequency Setting (2-pin) : JP2
CPU Front Side Bus Frequency
ON : (AUTO)
JP2
1
2
OFF : 100MHz
JP2
1
2