AMD XP-K7S748 Computer Hardware User Manual


 
10
English
2.2. Installation of Memory
1. Before installing or removing memory, please make sure that the computer power
is turned off to prevent hardware damage.
2. Please make sure that the memory used is supported by the motherboard.
3. Memory modules have a foolproof insertion design. The memory can be in
stalled only when facing the correct position. If you cannot insert the module,
please switch directions.
4. It is recommended that memory of similar capacity, specifications and brand be
used.
1. Unfasten the clips on each end of the memory slots.
Correctly align the memory module in the slot and
push downwards..
2. Once the memory module is correctly inserted, the
clips will automatically refasten. If the memory mod
ule is positioned in the wrong direction, it will not
insert. If this occurs, please switch directions.
2.3. Installation of the Graphics Card
The motherboard supports DIMM memory modules, whereby BIOS will automatically detect
memory capacity and specifications. Memory modules are designed so that they can be
inserted only in one direction.
1. Before installing the graphics card, please carefully
read the accompanying user manual. As well, make
sure the computer power is turned off.
2. Your graphics card must be 1.5V and support the
AGP4X specification.
3. When installing or removing the graphics card, first
pull out the white AGP knob before insertion or
removal. Releasing the AGP knob will hold the
graphics card firmly in place.
3
Position and
attach the clips
on one end of
the fan sink
firmly atop the
CPU. Please
4
Connect the 3-
pin cooler
power connec-
tor to the CPU
Fan connector
located on the
motherboard.
do the same for the clips on the other end of
the fan sink.