AMD XP-K7S748 Computer Hardware User Manual


 
20
English
3.8. Frequency/Voltage Control
ø This allows user to configure CPU frequency and voltage settings.
ø This section is very dangerous for inexperienced users, and therefore it is not
recommended that these settings be altered. An incorrect setting can result in system
instability, corrupt data, or permanent hardware damage.
n Linear Frequency Control
Allows user to use Linear Frequency Control (default:Disabled)
n CPU Clock (MHz)
If you wish to use this feature, please set the "Linear Frequency Control" to Enabled. If this
feature is disabled, the currently CPU frequency will be displayed.
The CPU Clock can be input between 100MHz to 355MHz.
n DRAM Clock (MHz)
Allows user to adjust the DRAM clock frequency. (default:Auto)
Please note that if the DRAM clock frequency is incorrectly set, the system will be unable
to start. You can use the clear CMOS method to return the system to its default settings.
n AGP Voltage Control
Allows user to set the AGP voltage. (default:Normal)
Please note that by overclocking your system through the increase of the AGP voltage,
system instability or damage to the AGP card may occur.
Options: Normal (automatic setting of AGP voltage at 1.5V)
+0.1V (AGP voltage range)
n DRAM Voltage Control
Allows user to set the DIMM voltage. (default:Normal)
Please note that by overclocking your system through the increase of the DIMM voltage,
damage to the memory may occur.
Options: Normal (automatic setting of DIMM voltage at 2.5V)
+0.1V (DIMM voltage range)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Frequency/Voltage Control
Linear Frequency Control [Disabled]
ø CPU Clock(MHz) 100
ø DRAM Clock(MHz) AUTO
AGP Voltage Control [Normal]
DRAM Voltage Control [Normal]
CPU Voltage Control [Normal]
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Default F7: Optimized Defaults
Item Help
Menu Level}