Filter
Top Products
6
English
1.2. I/O Back Panel and Connectors & Jumper Setting
1.2.2. Connectors & Jumper Setting
FDD (Floppy Disk Drive Connector)
The FDD connector is able to connect a single floppy disk drive via a FDD cable. Usually one
edge of the FDD cable is marked in red, please attach this marked edge to position 1 on the
connector.
PS/2 Keyboard / Connects PS/2 standard keyboard and PS/2 standard
PS/2 Mouse mouse
Parallel port (LPT) Connects to printer
COMA/COMB (Serial port) Connects to serial-based mouse or data processing devices
LAN (RJ45 LAN Port) Internet connection with speed of up to10/100Mbps
USB Prior to use, please make sure that your system as well
(Universal Serial Bus Port) as the connected attachments support the USB interface.
If driver installation is required, please consult the USB
section of the user manual.
Line In Connects to optical devices, CD players and other audio
input devices
LineOut Connects to speakers or headphones
Mic In Connects to microphone
SW1 (System Jumper)
System clock can be adjusted to 100/133/166/200MHz. SW1 allows you to adjust the system
clock.
ON
OFF: Auto (133/166/200MHz , supports FSB 266/333/
400MHz CPU)
ON: 100MHz (supports FSB 200MHz CPU, default)
If you are using a FSB
266MHz/333MHz or 400MHz
CPU, please set the jumper to
OFF (133/166/200MHz).
OFF
ON
OFF
1.2.1. I/O Back Panel
LAN
Parallel Port
PS/2 Keyboard
USB
COM B
COM A
MIC In
PS/2 Mouse
Line In
Line Out
USB
1
342
33