Filter
Top Products
6
English
1.2. I/O Back Panel and Connectors & Jumper Setting
1.2.2. Connectors & Jumper Setting
FDD (Floppy Disk Drive Connector)
The FDD connector is able to connect a single floppy disk drive via a FDD cable. Usually one
edge of the FDD cable is marked in red, please attach this marked edge to position 1 on the
connector.
1.2.1. I/O Back Panel
PS/2 Keyboard / Connects PS/2 standard keyboard and PS/2 standard
PS/2 Mouse mouse
USB Prior to use, please make sure that your system as well
(Universal Serial Bus Port) as the connected attachments support the USB interface.
If driver installation is required, please consult the USB
section of the user manual.
LAN (RJ45 LAN Port) Internet connection with speed of up to10/100Mbps
Parallel port (LPT) Connects to printer
COMA/COMB (Serial port) Connects to serial-based mouse or data processing devices
Game Port Connects to joystick device
LineOut Connects to speakers or headphones
Line In Connects to optical devices, CD players and other audio
input devices
Mic In Connects to microphone
PS/2
Keyboard
PS/2
Mouse
LAN
USB
COM B
Parallel Port
COM A
Game Port
Line Out
Line In
MIC In
SW1 (System Jumper)
System clock can be adjusted to 100/133/166MHz. SW1 allows you to adjust the system
clock.
ON
OFF: Auto (133/166MHz , supports FSB 266/333MHz CPU)
ON: 100MHz (supports FSB 200MHz CPU, default)
If you are using a FSB
266MHz or 333MHz CPU,
please set the jumper to OFF
(133/166MHz).
1
342
33
OFF
ON
OFF