Filter
Top Products
48
7.0 Difficulty
7.5 Obtaining Service
The troubleshooting chart in Section 7.1 covers most of the difficulties that a user may
encounter under conditions other than a failure of the UPS itself. For problems not
covered in the chart, or when the UPSs display shows call for service, the proce-
dures outlined below should be followed.
If your UPS should require service:
n See the troubleshooting chart and eliminate the obvious. A tripped UPS circuit
breaker is the most common problem encountered and
is user-resettable once excessive loads are unplugged
from the UPS.
n If the circuit breaker is OK, note your UPS model, serial
number and date of purchase. Contact the Customer Service
Department at the phone number given on the cover of this
booklet.
n Be prepared to provide a description of the problem. A
technician will help you solve the problem over the phone if
possible, or will give you a Return Material Authorization
Number (RMA#).
n If the UPS is within the warranty period, repairs will be performed free of charge.
If it is not within the warranty period, there will be a charge for repair.
n Pack the UPS in its original packaging. If you no longer have the original shipping
materials, ask the technician about obtaining a new set. It is very important that you
pack the UPS properly to avoid damage in transit. Never use styrofoam beads for
packaging a Battery Pack or Electronics Unit because they will settle through beads
and become damaged. Damages sustained in transit are not covered under warranty.
Enclose a letter in the package with your name, RMA#, address, copy of sales receipt,
description of trouble, phone number and check (if necessary).
n Mark your RMA# on the outside of the package. The factory cannot accept any
package without this marking.
n Return your UPS by insured, prepaid carrier to the address on the rear of this
manual.