Filter
Top Products
5
2. Refer to the diagram below for wiring details.
• Connect the black and white wires from the incoming utility line.
• Route the power feed COAX to the bottom of the enclosure and attach to the COAX
cable adapter using a pin connector.
• Attach the stinger lug to the pin connector center pin.
• Attach suitable solid copper ground wire to the enclosure ground lug and ground in
accordance with local codes.
• Check for voltages between each connector pin and ground using a multimeter.
Presence of voltage indicates an improper ground. If voltage is present ensure the
ground contact is secure.
• Reinstall the front door of the enclosure. Squeeze the edges of the enclosure to place the
pins in position.