Filter
Top Products
Communication Configuration
38 60 kW InfraStruXure PDU—Operation and Configuration
TCP/IP configuration methods
Use one of the following methods to define the TCP/IP settings needed by the InfraStruXure PDU:
• Device IP Configuration Wizard (See “Device IP Configuration Wizard” on this page.)
• BOOTP or DHCP server (See “BOOTP & DHCP configuration” on page 39.)
• Local computer (See “Local access to the control console” on page 41.)
• Networked computer (See “Remote access to the control console” on page 41.)
Device IP Configuration Wizard
You can use the Device IP Configuration Wizard on a Windows NT
®
4.0, Windows 2000, or
Windows XP computer to discover unconfigured InfraStruXure PDUs and configure their basic TCP/
IP settings.
1. Insert the InfraStruXure PDU Utility CD into a computer on your network.
2. Launch the Wizard, when prompted, or, if prompted to restart the computer, access the Wizard
from the Start menu after the computer has restarted.
3. Wait for the Wizard to discover the first unconfigured InfraStruXure PDU, then follow the on-
screen instructions.
See als
o
To configure one or more InfraStruXure PDUs by exporting configuration settings from
a configured PDU, see “How to Export Configuration Settings” in the online Network
Management User’s Guide on the Utility CD.
Note
If you leave the Start a Web browser when finished option enabled, you can use apc
for both the User Name and Password to access the InfraStruXure PDU through your
browser.