Filter
Top Products
PDU Display Interface
14 60 kW InfraStruXure PDU — Operation and Configuration
Top-level status screens
After system start-up, the display interface displays a brief start-up screen and then scrolls
automatically and continuously through four screens of basic status information. Press the Up and
Down arrow keys to interrupt the automatic scrolling if you wish to view a specific status screen.
Top-level menu screen
On any top-level status screen, press the ENTER key to open the top-level menu screen.
Navigating through screens
To open any screen, press the Up and Down arrow keys until the selector arrow (
rests next to your
desired selection. Press the
ENTER key to view the selected screen.
When configuring settings, press the Up and Down arrow keys
until the selector arrow (
rests next to the setting you want to
change, and press the
ENTER key. If the setting is a list of choices,
an input arrow (
will appear next to the setting. Press the Up and
Down arrow keys until your desired change is listed. Press the
ENTER key to select the setting.
Volts In
L1-2: 000
L2-3: 000
L3-1: 000
L1: 000
L2: 000
L3: 000
Volts Out
Total Output Loading
kW:
kVA:
Freq:
PF:
%LD:
000
00.0
000
000
000
Load Current
L1: 000
L2: 000
L3: 000
Neut:
000
No Active Alarms
System Date/Time:
Jun-24 2003 07:58
Note
If the display interface is inactive for the time specified as the Time-out setting, the
interface reverts to the initial basic monitoring screens.
For descriptions of the top-level menu choices, see the individual sections starting on
page 16.
Load-Meter
Volt-Meter
Contacts
Breakers
Alarms
Panel
Config
Help
Load-Meter
Volt-Meter
Contacts
Breakers
Alarms
Panel
Config
Help
Contacts In: 02of04
Name: User Switch #2
Normal: Open
Status: Open
Contacts In: 02of04
Name: User Switch #2
Normal: Open
Status: Open