Filter
Top Products
2-1
Chapter
2
Installation
This chapter contains the following sections:
• Removing the Battery Pack
• Placing the Unit
• Inserting and Connecting the Battery
• Powering On and Connecting Equipment
• Performing the System Test
• Status and Informational Screens
• Connecting the Components
• Setting Up the S10 or S15 Using the Front-Panel Controls
Removing the Battery Pack
1. Remove the battery retaining bar.
2. Pull the battery straight back.
3. Push in the retaining tabs to allow the battery to come out completely.
Placing the Unit
Proper placement of the S10 or S15 should be accomplished in accordance with the
following:
Warning:
The S10 and S15 weigh approximately 60 pounds each. Two-person lift
is recommended. First removing the battery as described above will make placing the
unit much easier. Lift each unit carefully by firmly grasping both sides of unit in the