Filter
Top Products
Chapter 2 Product Overview
ReadyBoard 700 Reference Manual 7
♦ Supports dual bus master mode
♦ Supports Ultra DMA 33/66/100 modes
♦ Supports ATAPI and DVD peripherals
♦ Supports IDE native and ATA compatibility modes
♦ CompactFlash Adapter (Secondary IDE only)
• Supports Type I or Type II PC Card socket
• Supports IDE CompactFlash Card
• Supports secondary IDE bus with Master/Slave jumper
• Supports bootable CompactFlash card
• Floppy/Parallel Interface
♦ Shared floppy/parallel connector
♦ Supports one standard (34-pin) floppy drive and one USB floppy drive
♦ Supports all standard PC/AT formats: 360KB, 1.2MB, 720KB, 1.44MB, 2.88MB
♦ Supports a standard printer port
♦ Supports IEEE standard 1284 protocols of EPP and ECP outputs
♦ Bi-directional data lines
♦ Supports 16 byte FIFO for ECP mode
• Serial Ports
♦ Four buffered serial ports with full handshaking
♦ Supports two DB9 connectors Serial 1 & 2 (COM1 & COM2)
♦ Supports two serial ports Serial 3 & 4 (COM3 & COM4) through 20-pin header
♦ Provides 16550-equivalent controllers, each with a built-in 16-byte FIFO buffer
♦ Supports full modem capability and RS232 on all four ports
♦ Supports RS485 or RS422 operation two ports Serial 3 & 4 (COM3 & COM4)
♦ Supports programmable word length, stop bits, and parity
♦ Supports 16-bit programmable baud-rate generator and a interrupt generator
• Infrared Interface
♦ Supports IrDA 1.1 on separate connector (J17)
♦ Supports HPSIR and ASKIR infrared modes
♦ Support IR mode select from the Southbridge
• USB Ports
♦ Supports two root USB hubs
♦ Supports up to four USB ports
♦ Supports two standard USB connectors (USB 0 & 1) and one 10-pin header (USB 2 & 3)
♦ Supports USB v1.1 and Universal OHCI v1.1
♦ Supports over-current fuses on board
• Keyboard/Mouse Interface
♦ Supports PS/2 keyboard