Filter
Top Products
45
Ribbon Problems
LED/LCD
Indication
READY and RIBBON LEDs
Blinking
LCD Display
RIBBON OUT
Possible Problems
Solutions
Remarks
Ribbon out
Supply the ribbon roll
Not applicable to direct
thermal.
Ribbon jam
Recover the jam
Ribbon sensor
error
Replace ribbon sensor
Note: If you use direct thermal, set with panel, Windows driver or command.
Other Problems
LED
Indication
READY LED
Blinking
Problems
Solutions
Remarks
Serial IO error
Check the baud rate,
format or protocol
between host and printer
Not for Centronics
Cutter failed
Check the media.
Check the connection
between cutter and
main board.
Call for service.
Memory full
Check graphics and soft
fonts from host. Delete by
application software for
those no longer in use.
Need to reboot the
system.
Note: After problem is solved, press CANCEL to continue printing
.