Filter
Top Products
64
Appendix A: Printer Status
LCD display
Blinking LED
Description
PAUSE
READY
Printer is paused. Press PAUSE or CANCEL to
return to normal.
MEDIA OUT
MEDIA
READY
Media is uninstalled or used up. Load new
media to the printer.
RIBBON OUT
RIBBON
READY
Ribbon is uninstalled or end-of-ribbon occurred.
Load new ribbon to the printer.
SERIAL IO
ERROR
READY
Format or baud rate of RS232 communication is
inconsistent between printer and host.
CUTTER
FAILED
READY
Cutter cannot cut off the media, check media
and cutter.
MEMORY FULL
READY
Printer buffer full due to loaded soft fonts,
graphics or forms. Check data format. Call for
service.
HEAD OPEN
READY
Print head latch is not closed. To print label the
head latch must be closed.
P. SENSOR
O.R.
READY
Media sensor is out of range during calibration.
Make sure the media is installed and the label
sensor is under the media.
TPH TOO HOT
MEDIA
Printing job will start until the temperature of
TPH goes down.