Filter
Top Products
65
Appendix B: Stand-alone Keyboard and Barcode Reader
This appendix covers stand-alone operation with keyboard or barcode reader.
Keyboard
To use the printer in stand-alone operation with a keyboard follow the procedure
described below:
1. Make a form for the keyboard. (The form should include “ZS” command to
store to flash memory. Refer to the following command sample.)
2. Turn on the printer; download the form from PC to printer.
3. Turn off the printer.
4. Connect the keyboard to the keyboard interface.
5. Turn on the printer.
6. Check LCD for instructions of each data string/ label count/ copies; type to
input data accordingly.
Form Control Functions
Key
Function
Esc
Enter or exit from keyboard mode
Backspace
Delete the last typed character
F1
Next form if more than one form exists
Enter
- Select the form
- End of typed data