Filter
Top Products
Safety Instructions
A
VS-SL-PR-0401-0601
Safety Instructions
Overview
Please read these instructions before using your Procon switcher. Failure to comply with these
instructions could result in fire, electrical shock, personal injury, death, or damage to the equipment.
Power Source
Use only a three-wire grounding type source. The power source should not exceed 264VAC. Do not
remove under any circumstances the ground wire.
Power Cord
Use only the cord shipped with the unit. Do not use the cord if it has become damaged or frayed. Contact
your Procon dealer or call Procon if you need to replace the power cord.
Grounding
The interface is grounded through the grounding conductor on the power cord. To avoid electric shock
plug the power cord into a properly wired receptacle. Do not defeat the purpose of the grounding-type
plug.
Fuse
For protection against the risk of fire use only a fuse of the same rating and type.
Liquid Spills
Do not set drinks on top of the unit or immerse the unit in liquid.
Do Not Disassemble
The switcher contains no user serviceable parts. All servicing must be performed by a qualified service
technician.
For Safety Reasons
Do not place the unit on an unstable surface.
Do not use near water or sources of heat.
Use only recommended attachments.
Use the correct power supply as indicated on the unit.
Unplug the unit from the mains before and refer to a qualified technician if:
the power cord has become damaged
liquid has been spilled or it has been exposed to rain or water
it does not operate correctly
it has been dropped or the cabinet damaged.