Filter
Top Products
Configuration
21
CSG SIP Communications Gateway
FIG. 10 displays the WAN Network tab of the Networking Configuration page. You can access this page
by selecting Network | WAN Network from the System tab. You can use the options on this tab to
establish the settings that enable you to connect to the Internet, or to an internal, private network.
FIG. 10 Networking Configuration page - WAN tab
The following table lists the options on the WAN Network tab of the Networking Configuration page:
If you have difficulty obtaining an IP address dynamically, clear the DHCP check box and specify the IP
address, subnet, gateway, and DNS settings. This information should be available from your network
administrator or Internet Service Provider (ISP).
Networking Configuration - WAN Network Tab Options
Option Description
DHCP This option enables you to indicate whether you want to enable
the Dynamic Host Configuration Protocol (DHCP) on your WAN.
This option is enabled by default.
IP This field enables you to view or change the IP address for your
WAN.
SUBNET This field enables you to view or change the subnet address for
your WAN.
GATEWAY This field enables you to view or change the gateway address for
your WAN.
DNS This field enables you to view or change the DNS address for
your WAN.
GUI This option enables you to indicate whether you want to enable
access to the CSG’s Graphical User Interface (GUI) via the WAN
interface.
Polycom
Provisioning
This option enables you to indicate whether you want to allow
provisioning of Polycom phones connected through the WAN.