AMX CSG-580 Network Card User Manual


 
Touch Panel Configuration
53
CSG SIP Communications Gateway
Touch Panel Configuration
AMX Modero panels feature on-board Setup pages. You can use the options in the Setup pages to access
panel information and make various configuration changes. The MVP-8400i, NXD-700Vi, and
NXD-1000Vi panels support SIP calls, so you can use these models with your CSG. This chapter only
covers the pages necessary to help you configure your touch panel for use with the CSG. For more
information about other features on these setup pages, consult the instruction manual for your specific
touch panel at www.amx.com.
Setup Pages
On the main Setup page on your touch panel, press Protected Setup (FIG. 1) to access the Protected
Setup page.
FIG. 1 Protected Setup button
The Protected Setup page provides secure access to advanced panel configuration options, including
communication and security settings. Enter your password or the factory default password (1988) into
the password keypad to access this page.
The Protected Setup Navigation buttons appear on the left of the panel screen when the Protected Setup
page is active.
Other Settings Slide Out Menu
The Other Settings button (FIG. 2) provides a slide out menu with the option to select the SIP Settings
page. Select SIP to access the SIP Settings page.
The options on the SIP Settings page (FIG. 3) enable you to establish network settings for using your
touch panel as an IP phone. You may need to load a Duet module to enable the touch panel to receive SIP
calls. The Duet module translates between the standard interface and the device protocol. It parses the
buffer for responses from the device, sends strings to control the device, and receives commands from
the UI module or telnet sessions. Refer to the documentation supplied with the Duet Module for more
details.
FIG. 2 Other Settings menu
A sample UI module is provided in the module package. It is not intended to cover
every possible application, but can be expanded as needed by a dealer to meet the
requirements of a particular installation.