Filter
Top Products
Installation & Setup
19
Precis SD Instruction Manual
4. Attach only the first two source and destination devices; see “Attaching Inputs & Outputs”
on page 24.
Do not apply power to the devices until after the Precis SD has power (Step 5).
5. Apply power to the system according to the power-up procedure; see “Applying Power & Startup”
on page 27.
Note: We recommend using surge protectors and/or AC line conditioners.
6. Execute a test switch to ensure the system is working properly; see “Executing a Test Switch”
on page 29.
7. When the test switch works correctly, attach the remaining source and destination devices.
Additional Installation Options
Additional installation tasks may include the following:
Creating custom channel names – See page 50 in “Appendix A – Managing Configuration
Files.”
Setting a control panel password – See page 51 in “Appendix A – Managing Configuration
Files.”
Creating / Defining local presets for macros – See page 52 in “Appendix A – Managing
Configuration Files.”
Creating global presets – See the BCS Protocol Instruction Manual on the AMX AutoPatch
CD or at www.amx.com.