Filter
Top Products
Firmware Pages and Descriptions
48
TPI-PRO Total Presentation Interface - Pro Edition
Setup Page
The page (FIG. 35) centers around the basic properties used by the touch device connected to the
TPI-Pro such as: Connection Status of the TPI-PRO, Display Timeout, Inactivity Page Flip Time, and
Inactivity page file information for the TPI-PRO device.
The elements of the Setup page are described in the table below:
G4 Setup Navigation Button Elements (Cont.)
Video Press the Video Adjustment button to access the main video page where you
can set the video properties for incoming signal.
• The displayed page is associated to the HD-15 port being used.
• The TPI-PRO-4 can use any combination of up to four (4) source inputs. The
TPI-PRO-2 can use any combination of up to two (2) source inputs.
• Refer to the Video Settings Page section on page 54 for more detailed
information.
FIG. 35 Setup page
Setup Page Elements
Exit Returns you to the Main touch panel page. In this case, the previous page is the
default Main page.
Connection Status icon This visual display of the connection status allows the user to have a current
update of the TPI-PRO’s connection status regardless of what page is currently
active.
• A Lock only appears on the icon if the TPI-PRO has established a connection
with a currently secured target Master (requiring a username and password).
Connection Status
Red Connection Status icon -
Green Connection Status icon -
indicates no connection to
indicates communication
a Master
to a Master
Yellow Connection Status icon -
indicates an unreliable
network connection