Filter
Top Products
4 EZ-KIT LITE HARDWARE REFERENCE
4.1 Overview
This chapter describes the hardware design of the ADSP-21535 EZ-KIT Lite
board. The following topics are covered:
• System Architecture (Section 4.2)
Describes the configuration of the DSP as well as a description of
how all of the components on the board interface with the DSP.
• Jumper and DIP Switch Settings (Section 4.3)
Shows the location and describes the function of all the
configuration jumpers and DIP Switches.
• LEDs and Push Buttons (Section 4.4)
Shows the location and describes the function of all the LEDs and
push buttons.
• Connectors (Section 4.5)
Shows the location and gives the part number for all of the
connectors on the board. Also, the manufacturer and part number
information is given for the mating part.
• Specifications (Section 4.6)
Gives the requirements for powering the board.
ADSP-21535 EZ-KIT Lite Evaluation System Manual
4-1