Filter
Top Products
4.5.4 USB (P7)
The USB connector is a standard Type B USB receptacle. This connector is used
to debug the DSP, and is not connected to the DSP’s USB interface.
Part Description Manufacturer Part Number
Mill-Max 897-30-004-90-000 Type B USB receptacle (P7)
Digi-Key ED90003-ND
Mating Connector
Assmann AK672-5 USB cable (provided with kit)
Digi-Key AK672-5ND
4.5.5 JTAG (P8)
The JTAG header is the connecting point for a JTAG in-circuit emulator pod.
When an emulator is connected to the JTAG header, the USB debug interface is
disabled.
! NOTE: Pin 3 is missing to provide keying. Pin 3 in the mating connector
should have a plug.
! NOTE: When using an emulator with the EZ-KIT Lite board, follow the
connection instructions provided with the emulator.
ADSP-21535 EZ-KIT Lite Evaluation System Manual
4-13