Filter
Top Products
BROAD SCAN (HD/SDI) Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued)
PAGE 21
Loop
Erase memories
Default value
New EDID format ?
no yes
[ 640 * 480 ]
...
[ 1600 * 1200 ]
[ 50 ]
[ 60 ]
[ 72 ]
[ 75 ]
EDID Selection Local
Stand-by
Edit EDID DVI EDID Format EDID Rate
Sync Loss
Time
Stand-by time
[ 1 ]
[ 5 ]
[ 10 ]
[ ... ]
Sync Loss+Time
Key locking All
Menus
Stand-by Auto After
select netmask
xxx.xxx.xxx.xxx
Netmask
Default setup
Device port select port
xxxxxRemote port
select address
xxx.xxx.xxx.xxx
Remote addr.
TCP
Gateway addr.
comm port selec
RS232 LAN
RS232/LAN port
Device addr.
LAN setup
UDP
Erase all
CONTROL Versions
Auto Frame ON/OFF
7
Dynamic Zoom
Erase Logo Erase logo 1
…
Confirm erase ?
no yes
Erase logo 4
Erase logo A
Recording time
Store
Confirm erase ?
no yes
Erase Frame
Lumakey Type
Luma key level
Black White
Cut Out Color
V. size
Position H. position
V. position
Logo 4 (L4)
Record Anim Size H. size
Logo 1 (L1)
Empty
Store
Empty
Lumakey Type
Luma key level
Black White
Cut Out Color
V. size
Position H. position
V. position
Store
Record Logo Size H. size
V. size
Position H. position
V. position
Logo 4 Transparency
Logo Animated
Record Frame Size H. size
LOGOS/FRAME
7
Frame ON/OFF
Logo Logo OFF
1 Available on BHD930 models
2 Depending on the selected format
3 Available if output format = genlock
4 Available for SDTV output format only
5 Available for NTSC output format only
6 Available for analog source type only
7 Available on BHD930 & BSD830 models
Zoom type
Direct Zoom
Logo 1
Logo 2 H. Pos
Logo 3 V. Pos