Filter
Top Products
Chapter 4 : FRONT PANEL DISPLAY MENU DESCRIPTION (continued) BROAD SCAN (HD/SDI)
PAGE 28
4-5. FUNCTIONS DESCRIPTION (continued)
[Edit EDID DVI]
Extended Display Identification Data (EDID) is a data structure provided by a computer display to describe its
capabilities to a graphics card. The Broad Scan allows to edit a format when none control monitor (computer
display) is connected to the broad scan or when you need to work in another format than the native control monitor
format. Select the resolution and rate, then activate the Broad Scan EDID (local) in following section
[EDID Selection] + ENTER.
Local: Activate the Broad Scan EDID
Loop: Activate the computer display EDID. The computer display should be connected to the DVI-D monitor
OUT.
[Erase memories] + ENTER.
This function allows erasing all the image settings memorized.
[Default value] + ENTER.
This function allows clearing the following adjustments and setting them to the factory value:
FUNCTION POSITION FUNCTION POSITION
INPUTInput type RGBHV/Cs AUDIOAudio Embed. OFF
INPUTH sync load Hi-Z. AUDIOMute OFF
INPUTInput format Auto select AUDIOLevel 48
OUTPUTFormat PAL 50Hz AUDIOBalance 0
OUTPUTGenlockH phase 0 LUMA KEY OFF
OUTPUTGenlockSC phase 0 LOGOS/FRAMEFrame OFF
OUTPUTType YUV LOGOS/FRAMEFrame OFF
OUTPUTTest pattern OFF CONTROLzoom type direct
IMAGEAspect in 4/3 CONTROLauto frame OFF
IMAGEAspect out 1:1 CONTROLEDID Selection Loop
IMAGEUnder/over underscan Front PanelFRAME OFF
IMAGER, G, B levels 0 Front PanelFREEZE OFF
IMAGEBlack level 0 Front PanelPosition 0
IMAGEGamma 1 Front PanelSize 0
IMAGEFlicker filter 4 Front PanelZoom mode OFF
IMAGESharpness 0 Front PanelZoom size 100%