Filter
Top Products
BROAD SCAN (HD/SDI) Chapter 7 : TECHNICAL SPECIFICATIONS
PAGE 35
7-2. VIDEO OUTPUTS (continued)
• HD-YUV / HD-YCrCb (MODELS: BHD930-AG & BHD930-DG)
Connectors: 3 BNC female.
Format: 720p @ 60, 59.94 & 50 Hz (SMPTE 296M)
1080i @ 60, 59.94 & 50 Hz (SMPTE 274M)
1035i @ 60 & 59.94 Hz (SMPTE 260M)
1080sF @ 30, 29.97 & 25 Hz (RP2H/SMPTE 274M)
1080p @ 30, 29.97, 25, 24 & 23.98 Hz (RP2H/SMPTE 274M)
Level: Y: 1 Vp/p (0.7 V Luma ± 0.3 V Sync.).
Cr, Cb: 0.7 Vp/p.
Impedance: 75 Ohm.
• S.VIDEO
Connector: 4-pin mini DIN female.
Standard: PAL : 15.625 kHz / 50 Hz - 625 lines.
NTSC : 15.734 kHz / 59.94 Hz - 525 lines - 7.5 IRE.
Level: Y : 1 Vp/p (0.7 V Luma + 0.3 V Sync.).
C : 0.7 Vp/p (0.3 V Chroma Burst).
Impedance: 75 Ohm.
• COMPOSITE VIDEO
Connector: BNC female.
Standard: PAL : 15.625 kHz / 50 Hz - 625 lines.
NTSC : 15.734 kHz / 59.94 Hz - 525 lines - 7.5 IRE.
Level: 1 Vp/p (0.7 V Luma + 0.3 V Sync.).
Impedance: 75 Ohm.
• FRAME LOCK
Connector: BNC female.
Rate: Same rate as the output frame rate.
Signal: TTL level.
• SDI*
Connector: BNC female (x2).
Signal: 270 Mbps (4:2:2 – 10 bits) serial digital output.
Impedance: 75 Ohm.
• HD-SDI (MODELS: BHD930-AG & BHD930-DG only)
Connector: BNC female.
Signal: 1.5 Gbps (4:2:2 – 10 bits) serial digital output.
Format: 720p @ 60, 59.94 & 50 Hz (SMPTE 296M)
1080i @ 60, 59.94 & 50 Hz (SMPTE 274M)
1035i @ 60 & 59.94 Hz (SMPTE 260M)
1080sF @ 30, 29.97 & 25 Hz (RP2H/SMPTE 274M)
1080p @ 30, 29.97, 25, 24 & 23.98 Hz (RP2H/SMPTE 274M)
Impedance: 75 Ohm.
• ANALOG (SD/HD) LUMA KEY (HD available on BHD930 models only)
Connector: BNC female.
Format: Same format as the output.
Level: 0.7 Vp/p.
Impedance: 75 Ohm.
* Available on the BSD830 & BHD930 models only.