Filter
Top Products
15
©1994 - INLINE, INC. IN1222 / IN1422 / IN1510 / IN1710 OPERATIONS MANUAL - REV. 2 12/04/99
UNIVERSAL POWER SUPPLY
The IN1222 / IN1510 / IN1422 / IN1710 employ a universal (switch mode) power supply which
automatically adjusts to accept input voltages worldwide. Input voltage can range between 96V and
260V AC and frequency may range from 50 Hz to 90Hz. The power entry module uses an IEC standard
male connector for power connection. U.S. domestic units are shipped with a standard IEC female to
Edison male power cable.
Changing Fuses
The power entry module includes a quick-change fuse holder located to the left of the power switch.
This holder contains the main fuse and a spare fuse. If the fuse blows:
1. Remove the power cord from the unit.
2. Use a flat blade screwdriver to remove the fuse holder.
3. Replace the blown fuse with the spare fuse.
4. Replace the spare fuse with a new .5A 250V slow blow fuse.
5. Seat the fuse holder back into the power entry module and reattach the power cord.
RGB PIN OUT INFORMATION
The following information applies to the 15-pin HD connectors on the IN1222 / IN1510 / IN1422 /
IN1710. The IN1422 / IN1710 also include a set of 5 - BNC Female connectors for RGB input and
output.
Input 4 - RGB Passive Input
RGB Output
Input 4 and the RGB output both employ a 15-pin HD female connector with the following pin-outs:
Pin 1 Red Signal Pin 9 No connection
Pin 2 Green Signal Pin 10 Ground
Pin 3 Blue Signal Pin 11 No connection
Pin 4 No connection Pin 12 No connection
Pin 5 Ground Pin 13 Horizontal Sync or Composite Sync Signal
Pin 6 Red ground Pin 14 Vertical Sync Signal
Pin 7 Green ground Pin 15 No connection
Pin 8 Blue ground
The output sync format for decoded / doubled images (Inputs 1 - 3) has no effect on the output format of
RGB signals sent into Input 4. For instance, if the scan doubler is set to output RGBS, an RGBHV signal
applied to Input 4 will still appear at the output as RGBHV, but the decoded / doubled signals will appear
at the output as RGBS.
THE IN1222 / IN1510 / IN1422 / IN1710 CONTAIN NO INTERNAL FUSES,
JUMPERS, DIP SWITCHES OR OTHER USER SERVICABLE PARTS. IF
THE CASE IS OPENED THERE IS ELECTRIC SHOCK HAZARD AND
DAMAGE MAY OCCUR TO THE COMPONENTS. REFER ALL SERVICE TO
INLINE.