Filter
Top Products
3
Mount the UPS
This unit is designed to mount on a heavy duty DIN rail or on the back panel of an enclosure. For details on
DIN rail installation refer to the DIN rail installation guide included in the DIN rail package. The DIN rail kit is
not included.
When mounting on the back panel of an enclosure, select screws that are appropriate for the weight of this unit
and the mounting surface material.
Six screws must be used when mounting this unit in an enclosure. Three screws in the top of the bracket and
three screws in the bottom of the bracket. Failure to follow these instructions may result in damage to the unit.
Battery Installation
The UPS battery is shipped in a separate carton.
Refer to the installation guide included with the replacement battery for installation instructions.
Top Bracket
Bottom Bracket