Filter
Top Products
3InRow RC Installation
Inspecting the Equipment
Inspect for missing components. All shipped loose components are identified by part number and
description on the bill of lading. Ensure each item is present before accepting delivery of the unit.
Filing a claim. If damage has occurred, or if shipped loose parts are missing, report it immediately to
the delivering carrier and note the problem on the receiving copy of the bill of lading. Failure to do so
will result in replacement parts and repairs being billed to the customer.
In case of shipping damage, do not operate the equipment. Keep all packaging for inspection by the
shipping company and contact APC by Schneider Electric.
Inventory
Installation kit
Door and side panel locks
The four side panels are locked at the factory, and the front and rear doors are not
locked. Two keys are in the plastic documentation envelope located inside the
equipment.
Item Description Quantity
1
1-in NPT to 1-in BSPT adapters 2
2
Tie wraps 3
3
Termination resistor 1
4
M5 x 12 mm Phillips screws 4
5
M4 x 8 mm Phillips screws 4
6
Wire clip 3
7
Key 2
na2329a